| Component | Qualcomm®Robotics RB5 Development Kit | 
        
            | SOM Platform | Qualcomm®QRB5165 Qualcomm®Kryo™ 585
 Qualcomm®Adreno™ 650 GPU, Adreno™ 665 VPU, Adreno™ 995 DPU
 Qualcomm®Hexagon™ DSP with quad HVX
 Qualcomm®Spectra™ 480 image processing
 | 
        
            | RAM | 8GB, LPDDR5 (POP) | 
        
            | Storage | 128 GB UFS3.0 Onboard Storage 1 x MicroSD Card Slot
 | 
        
            | Ethernet | 1 x 1GbE Ethernet | 
        
        
        
            | Wireless | WLAN 802.11a/b/g/n/ac/ax 2.4/5GHz 2x2 MIMO Bluetooth 5.1, on-Board WLAN/BT Antennas
 | 
        
            | USB | 1 x USB 2.0 Micro B (Debug only) 1 x USB 3.0 Type C (OTG Mode)
 2 x USB 3.0 Type A (Host Mode Only)
 | 
        
            | Display | 1 x HDMI 1.4 (Type A - full) on Board Connector | 
        
        
        
            | Audio | 2 x Class-D on Board Speaker Amplifier, WSA8810 1 x on Board PDM MIC on Mainboard, 4 x on Board PDM MIC on NAV MEZZ
 | 
        
            | Sensor | Accelerometer + Gyro Sensor (TDK ICM-42688/ ICM-42688-P) Barometric Pressure | 
        
            | Camera | Vision kit | IMX577 l*(only support in Qualcomm® Robotics RB5 Vision Kit.) GMSL l*
 OV9282 l*(only support in Qualcomm® Robotics RB5 Vision Kit.)
 
 | 
        
            | Accessories | Nuvoton®(ToF) – Sensor[MN34906] Intel®RealSense (D435i)
 | 
        
            | Expansion interfaces | Expansion connectors: HS1:1 x 60 pin high-speed connector (SDC I/F, 1 x 4L MIPI DSI, USB 2.0, CCI I2C x2, 2L+4L-MIPI CSI)
 HS2:1 x 60 pin high-speed connector (4L-MIPI CSI x 2, SPI x 1, PCIe 3.0 gen3 1L, USB 3.0 x1, GPIO x 8)
 HS3:1 x 60 pin high-speed connector (4L-MIPI CSI x 2, 4L-MIPI CSI x1(plus 2L CSI in HS1), RF CLK x 2, 2L-PCIe 3.0 x 1, 2L-PCIe 3.0 x 1(plus PCIe 1L in HS2), 4L-MIPI DSI x 1)
 LS1:1 x 40 pin low-speed connector (UART x 2, SPI, I2S/PCM, I2C x 2, GPIO x 12, DC powers)
 LS2:1 x 46 pin low-speed connector (Speaker x 2, DMIC I/F x 3, CAN, I2S, GPIOs, PWM, ADC, I2C, DC powers)
 LS3:1 x 46 pin low-Speed connector (SPI x 2, SSC I2C, sensor interrupt x 5, GPIOs, RTC clock, DC powers)
 | 
        
            | LED | 7 x LED Indicators 4 x User Controllable
 2 x For radios (BT and WLAN activity)
 1 x Power indicator
 | 
        
            | Buttons | Power Volume Up/Down
 Force USB Boot
 Dip Switch x 2 (6pin+4pin)
 | 
        
            | Power source | 12 V @2.5A adapter with a DC plug inner diameter 1.75mm and outer diameter 4.75mm | 
        
            | Size | 85 mm x 54 mm meets the 96boards Hardware Specifications |